For floor pans for all models, and for seat mounting bracket kits please go to the Exterior section, click on it, then on the drop down menu go to Sheet Metal and Framing sections. If you don't see it there, then it hasn't been listed yet or is not available. In either event feel free to send us an e-mail request or call us for more information.

This listing is for the interior panel that fastens to the inside of the rear hatch and runs from left to right. Many of these panels start sagging through the years, from moisture and gravity.  We sell these panels new so the problem is solved. This listing is only for the panel itself, and it does not include any fasteners or mounting hardware, they must be ordered separately. See listing.  If you can't figure out the fasteners you need then put a note in the comment section of the order form and we'll tell you what you need to look for to figure it out, and what the cost is.

 IMPORTANT NOTE: It is critical that these panels are sealed completely to the rear hatch or it can and will let exhaust come in through that area. This is a very dangerous and potentially fatal scenario so it's something that you want to take care of immediately. For more information on how exhausts gets into the inside of your z, just go to our website at www.zspecialties.com  , then go to the tips and info tab and click on it. Then scroll down the drop down to exhaust and click.

When ordering be sure to lists the year and model of your z in the comment section of the order form. We also need to know the color that you prefer, and whether you want vinyl or velour for covering. Most stock colors are available and a few custom colors as well.

If we happen to be out of stock of your particular panel please allow an extra week to 10 days for delivery to you.

Last update 01/11

This listing is for a single new hatch shock for all 240's. Tired of getting hit in the head by your hatch? Tired of using a sawed off broom handle to hold up the hatch? Replace that worn out hatch shock with one of these new ones and you won't be afraid to get into your hatch anymore. The original hatch shocks have been obsolete for many years and no one has tried to come up with a replacement.  

 After spending countless hours looking for something that will work, we have found a replacement aftermarket hatch shock that will fit on all 240's. It does not come with mounting hardware. We have designed and built a custom mounting hardware kit to make these a bolt on unit. That must be purchased separately, see listing or you can leave a note with your order asking us to add it for you. The cost of that kit is 25.00 and we will install it on your hatch shock before we ship it at  no extra charge. You will need to transfer the bracket that connects the shock to the rear hatch that is mounted on your existing hatch shock. That bracket is not available.

Last update 06/09

This listing is for a single aftermarket hatch shock. Requires 2 per car. If you're tired of getting hit in the head by your hatch or having to use a piece of broom stick to hold your hatch open, there is a much better solution. Put on a pair of these new hatch shocks and it will stay open all by itself.

This shock does  come with mounting hardware that is a breeze to install and it only fits the 2+2 models (4 seaters). If you have a coupe zx (2 seater)  then you must order the shocks designed specifically for them. See listing.

Last update 05/04

This listing is for a single aftermarket hatch shock. Requires 2 per car. If you're tired of getting hit in the head by your hatch or having to use a piece of broom stick to hold your hatch open, there is a much better solution. Put on a pair of these new hatch shocks and it will stay open all by itself.

This shock does  come with mounting hardware that is a breeze to install and it only fits the coupes. If you have a 2+2 zx then you must order the shocks designed specifically for them. See listing.

Last update 05/07

This listing is for a new hood cable assembly that fits all 70-73 240 z's. They come with a mounting bracket for under the dash, a lock nut for the bracket, and a new knob. They look exactly like the original. We do sell 2 different types of custom aluminum knobs if you'd like to go for a custom look. Call or e-mail for details.

These are temporarily a special order only item. Please allow an extra week to 10 days for delivery.

Last update 05/11

The hood release cable assembly is no longer available new for the 75-78 z's. Posted price is for used cable assemblys with good handles. Subject to availability.

If your hood cable knob is broken, we sell a hand made replacement knob and carry them in stock. They are made out of aluminum so they will never break. Easy to install, and much cheaper than buying a used cable assembly. See our listing in our knobs section.

If you need a cable, be sure to let us know the year of your z by leaving a note in the comment section of the order form.

Last update 05/11

Good used Hood Release Cable for a 280zx. Choose color. Subject to availability. If your hood cable handle has broken off, we do sell a custom made aluminum knob for these cars and they will never break. Much cheaper than buying a cable assembly. Check our knobs section for listing.

Fits stock 1979-83 Z-cars.

Last update 05/11

All three wear-prone pedal pads in one set! Includes Brake pad, Clutch pad, and Footrest pad.
Brand new, NOS.

Fits all 1970-78 Z-cars.

This listing is for a single 3 point stock replacement retractable seat belt assymbly which is enough to do one side. They will fit either side. The original 240 used a 3 point seat belt, but it was not retractable until 72 and even then it was an option, and was not standard equipment. It can be made to fit any vehicle, and for the early z's, they might as well be considered a direct bolt in. For the 70-71 240's it does require drilling 1 hole for each side to install properly. These are a retro seat belt with a modern latching mechanism and meet all safety regulations mandated by the federal government. Many vehicles in the 60's and 70's didn't have a good seat belt system and these new units are a nice addition to any car or truck. They come with all mounting hardware included.

These seat belts are also available in pairs for a discounted rate. See Seat Belt Retractable 3 point Kit. These are temporarily a special order only item, please allow an extra week for delivery.

Last update 08/11

This listing is for a pair of 3 point stock replacement retractable seat belt assymblies. One of these kits includes enough to do the drivers side as well as the passenger side. Check it out, we now have a new much lower price for these belts.

 The original 240 used a 3 point seat belt, but it was not retractable until 72 and even then it was an option, and was not standard equipment. The 70-71 belts are a big pain to use and they restrict necessary  movement inside the car. The 72-73 style was better, but it still has limitations, especially the non retractable version. It's very common for the retracting mechanism to break on the original 240 belts, which is not a good thing. Finally we have a very practical answer for a good price.

These kits can be made to fit any vehicle, and for the early z's, they might as well be considered a direct bolt in. For the 70-71 240's it does require drilling 1 hole for each side to install properly. For the 72-73 z's, no drilling is necessary. All mounting hardware is included in these kits. These are a retro seat belt with a modern latching mechanism and meet all safety regulations mandated by the federal government.

Many vehicles in the 60's and 70's didn't have a good seat belt system and these new units are a nice addition to any car or truck. We have installed these kits in z's, 510's, 521, and 620 pickups so far. As we said earlier, they come with all mounting hardware included.  We also sell 2 point retractable lap belt only systems for most vehicles, and also retractable retro seat belt kits for most other classic cars. Call for details.

These seat belts are also available individually but you get a better deal by ordering the complete kit. See Seat Belt Retractable 3 point Assymbly for a single unit. These are temporarily a special order only item, please allow an extra week for delivery.

Last update 08/11

This listing is for a single side of a 3 point replacement retractable seat belt assymbly. One of these kits includes enough to do either the drivers side as well as the passenger side. Check it out, we now have a new much lower price for these belts.

 The original 240 used a 3 point seat belt, but it was not retractable until 72 and even then it was an option, and was not standard equipment. The 70-71 belts are a big pain to use and they restrict necessary  movement inside the car. The 72-73 style was better, but it still has limitations, especially the non retractable version. It's very common for the retracting mechanism to break on the original 240 belts, which is not a good thing. Finally we have a very practical answer for a good price.

These kits can be made to fit any vehicle, and for the early z's, they might as well be considered a direct bolt in. For the 70-71 240's it does require drilling 1 hole for each side to install properly. For the 72-73 z's, no drilling is necessary. All mounting hardware is included in these kits. These are a retro seat belt with a modern latching mechanism and meet all safety regulations mandated by the federal government.

Many vehicles in the 60's and 70's didn't have a good seat belt system and these new units are a nice addition to any car or truck. We have installed these kits in z's, 510's, 521, and 620 pickups so far. They come with all mounting hardware included. While the picture only shows enough to do one side, this listing is for a pair of seat belt assymblies so you'll get twice as many as are in the posted picture. We also sell 2 point retractable lap belt only systems for most vehicles, and also retractable retro seat belt kits for most other classic cars. Call for details.

These seat belts are also available in a dual kit which is enough to do both seats. You get a better deal by ordering the complete kit. See listing. These are temporarily a special order only item, please allow an extra week for delivery.

Last update 08/11

This is the black plastic cap that goes on top of the rear shock tower. This listing is for a single unit, requires 2 per car.

Last update 09/09

Last update 10/08

Last update 03/08

This listing is for a single used sun visor for a 70-78 z car. Uses 2 per car. Be sure to leave a note in the comment section of the order form letting us know whether you want the left or right side, or both. These visors are in average intact condition which does vary a little from one visor to the next. The chrome on the arm  may or may not be pitted or rusty. The 77-78 right side visor came stock with a mirror and a flap on it. We don't have any left with the flaps still on them.

Last update 10/11

 These are factory replica shades, and are available in all stock colors.Hardware/fasteners not included.

Will fit 1979-83 2+2 Z-cars with factory T-tops.Colors add $10.00.

Last update 08/06

These are a pair of brand new T-top shades for your Z-car.
Available in black & various stock colors.Colors add $10.00. May need Hardware Kit.

Fits 1979-83 Z-cars with factory T-tops.

Last update 11/04 

These are a pair of brand new T-top shades for your Z-car.
Available in black & various stock colors. Add $10.00 to colors.
Does not include Hardware Kit.

Fits 1984-89 2+2 Z-cars with factory T-tops.

Last update 05/06