Comes with 2 front carpet pieces, 2 underseat, & the rear cargo deck carpet. If you would like to carpet other areas of your interior, see listings. We recommend using our sectional kits for all z's from 70-76. Less expensive, less work to install, and pretty much the same end results. We usually have these drop shipped directly from the manufacturer if you're inside the US, to help keep the price down. Please allow an extra 3 to 5 days for them to make the kits.

These kits were made with original Z design patterns, but are made with better materials than the originals! Made with a short cut dense pile of loop for longevity & durability.

Carpet Kits for Z’s from 70-96

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

Last update 12/10

This is the stock configuration carpet kit. It will cover the floor in front of both seats, the floor behind both seats and the rear deck as well.  Be sure to let us know whether you want loop or cut pile.  Most kits are black, but if you'd like a different color then contact us for availability. We recommend using the sectional kits on all z's from 70-76. A lot less work to install, less expensive, and the end result is just about the same. We have these kits drop shipped directly from the manufacturer to help keep the cost down. Please allow an extra 3-5 days to deliver. We do sell sectional kits that cover other areas of the car as well. See listings.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase sectional kits for that year as well. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Last update 12/10

Carpet Kits for Z's from 70-96 

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Last update 03/10

Comes with front carpet pieces, underseat pieces, & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit!

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.

Available in the following colors:

                              Red
Burgundy                                      RustBrown                                           Sand
Mocha                                          Tan
Navy                                             Royal Blue
Z Blue                                           Blue (light)
Grey (Silver)                                  Med. Grey
Charcoal (D.Grey)                         Black

Please specify color when ordering. Color pictures available soon.

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade sewn molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z's from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I'm putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and  sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas. These kits are available in about 30 different colors. These kits do not come with spray glue, If you're a picky consumer, and you want a molded kit, then you're better off with our premium grade heat molded kit.

The down side of the heat molded kit is that it's about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Sectional: 5 piece padded kit 70-76

2 pieces in front of seats, 2 pieces behind seats, 1 rear deck piece

Sectional: 6 piece padded kit 70-76

Same as 5 pce, but also has a piece for the transmission tunnel.

Sectional: 9 piece kit 70-76

Same as 5 pce padded kit, also includes both shock towers and wheel wells (unpadded.)

Sectional: 13 piece kit 70-76

Same as 9 piece kit, but also includes trans tunnel, rear riser, and 2 door sill pieces.

Sectional: Individual pieces or sections available

Transmission tunnel 1 piece

Rear Deck 1 piece

Trans tunnel and both door sills 3 pieces

Comes with front carpet pieces, underseat pieces, & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit!

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.

Available in the following colors:
Red
Burgundy          Rust
Brown            Sand
Mocha                Tan
Navy             Royal Blue
Z Blue             Blue (light)
Grey (Silver)       Med. Grey
Charcoal (D.Grey)   Black

Please specify color when ordering. Color pictures available soon.

Carpet Kits for Z’s from 70-96

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

Comes with front carpet pieces, underseat pieces, & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit!Keep in mind that you need to read the basic carpet description for the sewn molded kit which is down below, before ordering any of these kits.. These are not a plug'n'play kit, some trimming is requirded, and all bolt holes have to be cut in these kits.

We have these units drop shipped directly from the manufacturer to your door to save you money.

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.

The picture is of a stock tan kit installed in to a 280zx coupe.

Available in the following colors:
Red
Burgundy             Rust
Brown             Sand
Mocha               Tan
Navy                  Royal Blue
Z Blue                   Blue (light)
Grey (Silver)              Med. Grey
Charcoal (D.Grey)       Black

Please specify color when ordering. Carpet Kits for Z's from 70-96 

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Sectional: 5 piece padded kit 70-76   2 pieces in front of seats, 2 pieces underseat, 1 rear deck piece

Sectional: 6 piece padded kit 70-76

Same as 5 pce, but also has a piece for the transmission tunnel.

Sectional: 9 piece kit 70-76

Same as 5 pce padded kit, also includes both shock towers and wheel wells (unpadded.)

Sectional: 13 piece kit 70-76

Same as 9 piece kit, but also includes trans tunnel, rear riser, and 2 door sill pieces.

Sectional: Individual pieces or sections available

Transmission tunnel 1 piece

Rear Deck 1 piece

Trans tunnel and both door sills 3 pieces

This is a stock configuration sewn molded carpet kit for a 280 zx coupe. We also offer our premium grade heat molded kit for more money. Call or e-mail us for pricing or to place an order for the heat molded kits. 

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Comes with front carpet pieces, underseat pieces & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit! It does require trimming to install. We also offer a premium grade heat molded kit. Call or e-mail us for details or to place an order.

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.

Available in the following colors:
RedBurgundy              Rust
Brown                   Sand
Mocha                    Tan
Navy                       Royal Blue
Z Blue                        Blue (light)
Grey (Silver)                 Med. Grey
Charcoal (D.Grey)              Black

Please specify color when ordering. Color pictures available soon.

Carpet Kits for Z’s from 70-96

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

For those of you inside the US, our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

Last update 09/09

Carpet Kits for Z's from 70-96 

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Sectional: 5 piece padded kit 70-76                                                                                                          2 pieces in front of seats, 2 pieces underseat, 1 rear deck piece

Sectional: 6 piece padded kit 70-76

Same as 5 pce, but also has a piece for the transmission tunnel.

Sectional: 9 piece kit 70-76

Same as 5 pce padded kit, also includes both shock towers and wheel wells (unpadded.)

Sectional: 13 piece kit 70-76

Same as 9 piece kit, but also includes trans tunnel, rear riser, and 2 door sill pieces.

Sectional: Individual pieces or sections available

Transmission tunnel 1 piece

Rear Deck 1 piece

Trans tunnel and both door sills 3 pieces

Carpet Kits for Z's from 70-96 

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Sectional: 5 piece padded kit 70-76                                                                                                          2 pieces in front of seats, 2 pieces underseat, 1 rear deck piece

Sectional: 6 piece padded kit 70-76

Same as 5 pce, but also has a piece for the transmission tunnel.

Sectional: 9 piece kit 70-76

Same as 5 pce padded kit, also includes both shock towers and wheel wells (unpadded.)

Sectional: 13 piece kit 70-76

Same as 9 piece kit, but also includes trans tunnel, rear riser, and 2 door sill pieces.

Sectional: Individual pieces or sections available

Transmission tunnel 1 piece

Rear Deck 1 piece

Trans tunnel and both door sills 3 pieces

Comes with front carpet pieces, underseat pieces & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit!

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.

Available in the following colors:
Red (75C)
Burgundy (79C)                 Rust (65C)
Brown (47C)                 Sand (43C)
Mocha (44C)                 Tan (41C)
Navy (29C)                        Royal Blue (28C)
Z Blue (26C)                       Blue (light) (25C)
Grey (Silver) (15C)                  Med. Grey (16C)
Charcoal (D.Grey) (19C)               Black (05C)

Please specify color CODE when ordering. Color pictures available soon.

Carpet Kits for Z’s from 70-96

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Sectional: 5 piece padded kit 70-76

2 pieces in front of seats, 2 pieces behind seats, 1 rear deck piece

Sectional: 6 piece padded kit 70-76

Same as 5 pce, but also has a piece for the transmission tunnel.

Sectional: 9 piece kit 70-76

Same as 5 pce padded kit, also includes both shock towers and wheel wells (unpadded.)

Sectional: 13 piece kit 70-76

Same as 9 piece kit, but also includes trans tunnel, rear riser, and 2 door sill pieces.

Sectional: Individual pieces or sections available

Transmission tunnel 1 piece

Rear Deck 1 piece

Trans tunnel and both door sills 3 pieces

Carpet Kits for Z's from 70-96 

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Sectional: 5 piece padded kit 70-76                                                                                                          2 pieces in front of seats, 2 pieces underseat, 1 rear deck piece

Sectional: 6 piece padded kit 70-76

Same as 5 pce, but also has a piece for the transmission tunnel.

Sectional: 9 piece kit 70-76

Same as 5 pce padded kit, also includes both shock towers and wheel wells (unpadded.)

Sectional: 13 piece kit 70-76

Same as 9 piece kit, but also includes trans tunnel, rear riser, and 2 door sill pieces.

Sectional: Individual pieces or sections available

Transmission tunnel 1 piece

Rear Deck 1 piece

Trans tunnel and both door sills 3 pieces

Comes with front carpet pieces, underseat pieces & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit!

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.

Available in the following colors:
Red
Burgundy            Rust
Brown                      Sand
Mocha                         Tan
Navy                         Royal Blue
Z Blue                          Blue (light)
Grey (Silver)                     Med. Grey
Charcoal (D.Grey)                   Black

Please specify color when ordering. Color pictures available soon.

Carpet Kits for Z’s from 70-96

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet.

Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that I have said about these kits.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Sectional: 5 piece padded kit 70-76

2 pieces in front of seats, 2 pieces behind seats, 1 rear deck piece

Sectional: 6 piece padded kit 70-76

Same as 5 pce, but also has a piece for the transmission tunnel.

Sectional: 9 piece kit 70-76

Same as 5 pce padded kit, also includes both shock towers and wheel wells (unpadded.)

Sectional: 13 piece kit 70-76

Same as 9 piece kit, but also includes trans tunnel, rear riser, and 2 door sill pieces.

Sectional: Individual pieces or sections available

Transmission tunnel 1 piece

Rear Deck 1 piece

Trans tunnel and both door sills 3 pieces

This listing for our 6 piece sectional carpet kit comes with 2 front carpet pieces, 2 underseat, transmission tunnel & the rear cargo deck carpet. It's for the 74.5-76 coupes only.

The sectional kits are the best ones to use for the z's from 70-76. They're less expensive, require a lot less work to install, and the end result is just about the same, if not better. This is the carpet we consider to be the best overall deal for our customers.

These are a special order item. We order them directly from the manufacturer and have them drop shipped to you. This helps keep costs down to you. Please allow an extra 3-5 business days for delivery.

Carpet Kits for Z's from 70-96

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

Comes with front carpet pieces, underseat pieces, rear riser, & the rear cargo deck piece. It does have sewn bound edges where needed and only the rear deck carpet comes pre-padded. Bulk padding is available for an additional fee.
This is a sewn-molded kit and it does require a fair amount of cutting and trimming to install.

This is not the original design carpet kit for this car - the Sectional 5pc. carpet kit is stock.

We don't carry these kits in stock but order them directly from the manufacturer to help keep costs down. It usually only takes 1-3 days for them to make these kits.

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

Our regular grade sewn molded carpet kits are molded to fit the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, but having the sewn molded kits is a definite advantage over the sectional kits if you want to cover all of the contours properly like the original kits did. The sections on these kits do not necessarily follow the stock configuration, but the end result is the same.

These sewn molded kits also require some trimming on all front pieces, and all bolt-holes must be cut to fit. The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

This 6 piece sewn moulded does not come with padding on the front pieces. Only the cargo deck piece is prepadded and has sewn bound edges. This kIt includes the rear deck, the rear riser, behind and under both seats, and in front of both seats. The passenger pieces are large enough that they cover the transmission tunnel, and both door sill areas as well. The passenger section pieces do require some minor trimming to install. All bolt holes have to be cut.

We have numerous colors available in cut pile and a couple of colors in loop. Be sure to let us know which style and what color you prefer by leaving a note in the comment section of the order form.

We have these kits drop shipped directly from the manufacturer to keep the prices down. Please allow an extra week for delivery although it usually only takes them 2 or 3 days to build a kit once it's ordered.

As of 05/11 we do have a closeout one time sale for this kit in charcoal gray at a greatly reduced price, and we have the kit in stock. See listing in our blowout section.

Last update 04/10

Carpet Kits for Z's from 70-96 

We supply carpet kits from 2 different manufacturers. Our main supplier makes all of our sectional kits for the 70-76 Z’s, and what we call our regular grade sewn molded kits for Z’s and ZX’s from 70-96. Our second supplier makes our premium grade heat molded kits, and our custom floor mats that lock into the carpet and will never move on you.

The 5 piece sectional kits are all flat pieces, have sewn bound edges, and all pieces are padded. They are patterned after the original factory style carpet for all Z’s from 70-75. The 76 originally used a 6 piece sectional kit, but you can purchase a 5 or 6 piece kit according to your preference. These kits can be made in all stock colors in cut pile, but loop is available in black or a reddish burgundy only. I’m putting all this info up for people to read because of all the different types of carpet and their applications can be very confusing, and this write up should answer most of your questions.

SEWN MOLDED KITS:

Our regular grade sewn molded carpet kits are molded to fit some of the approximate contours of the floor pan for that year. They are not a precise fit like the original factory kits were, and they do not necessarily follow the same configuration as the original carpets. No one makes a kit like that anymore. The front sections do require trimming around the doors and console area, and they will sometimes require you to do some contouring yourself to fit some of your cars floor pan, and seat area configurations, etc. THEY ARE NOT A PRECISE FIT ONCE AGAIN. All pieces will need to have bolt holes cut in them as well.

The rear deck carpet is the only one that comes pre-padded in these kits. If you want padding for all the other pieces, then you need to buy a bulk padding kit from us, and cut it to fit. It is available by the square yard only. These kits are available in all stock colors in cut pile, but loop is available in black or a reddish burgundy only.

Our regular grade sewn molded kits also come with a can of spray glue. Please be careful using this product. Always use it in a well-ventilated area, and try to use a properly fitting respirator. It helps to have a fan blowing into the car and pushing fumes away from you. Breathing these fumes is hazardous to your health. If you aren’t able to use these types of products properly, then don’t use them at all.

HEAT MOLDED KITS

Our premium grade heat molded carpet kits are much better than our regular grade sewn molded kits. All pieces come pre-padded in these kits, and the back side of all pieces have been covered with plastic from a plastic injection mold where it is heat molded. This helps the carpet maintain it’s original shape better, and it also helps in resisting mold and mildew. These kits fit your floor pan contours much better than our sewn molded kits, BUT they still require a fair amount of trimming to fit. All bolt holes will have to be cut into them, and you’ll sometimes you’ll still have to cut the carpet to adjust it to fit the contours of your existing floor and seat areas.

These kits are available in about 30 different colors. These kits do not come with spray glue. If you’re a picky consumer, and you want a molded kit, then you’re better off with our premium grade heat molded kit. The down side of the heat molded kit is that it’s about 100.00 more than the sewn molded kit for the coupes, and even more than that for the 2+2’s.

Keep in mind that this is automotive carpet, not house carpet. Automotive carpet is thinner and not as plush as house carpeting is, but you don’t walk on automotive carpet either, so it doesn’t need to be as thick.

You may have seen one of or both of our molded kits for sale by other vendors. While they may not tell you outright that their kits are a perfect plug ‘n’ play fit for your car, a lot of them definitely imply it in the way they word their advertising. We’ve installed most of these carpet kits in Z’s and ZX’s, many times through the years, and we know the pros and cons of all of these kits. We know they’re a good product, not a perfect product, and definently not a plug’n’play product, but they are still the best on the market, especially for the price. We try to be as straightforward as possible with our customers, about all of the products that we sell, even at the risk of losing a sale. We want you to be satisfied with every product you buy from us. That is why we aren’t afraid to critique our own products to you.

Remember that if you order a carpet kit from us, make sure that you fully understand all that we have said about these kits. If you have any questions, feel free to contact us.

THEY ARE A SPECIAL ORDER PART AND ONCE YOU’VE ORDERED IT AND RECEIVED IT, YOU CANNOT RETURN IT FOR CREDIT OR A REFUND!

Comes with front carpet pieces, underseat pieces, riser, & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit!

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.

Available in the following colors:
Red
Burgundy                  Rust
Brown                   Sand
Mocha                      Tan
Navy                         Royal Blue
Z Blue                              Blue (light)
Grey (Silver)                       Med. Grey
Charcoal (D.Grey)                   Black

Comes with front carpet pieces, underseat pieces, riser, & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit!

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.

Comes with front carpet pieces, underseat pieces, riser, & the rear cargo deck piece.
This is a sewn-molded kit - it is actually sewn & shaped to fit your Z-car. No more flat carpet to bunch up & not fit!

These kits were made with original Z design patterns, but are made with better materials than the originals!Made with a short cut dense pile (Loop available in a few colors) for longevity & durability.